GEOFILL A light weight and thixotropic geothermal cement blend that is ideal for lost circulation, gravel or porous interval conditions. This slurry can be adjusted by adding cement accelerators to reduce pump time and additional lost circulation material for severe lost circulation conditions.

GEOLITE A light weight geothermal cement blend with adequate fluid loss control suitable for bottom hole circulating temperature of up to 160 °F. This slurry can be adjusted by adding cement accelerators or retarders to meet job specific thickening time requirements.

GEOTAIL A premium geothermal cement blend that poses rapid strength development and adequate fluid loss control. This slurry is typically used as the tail slurry and it is suitable for wells with bottom hole circulating temperatures up to 160°F. This slurry can be adjusted by adding loss circulation material and/or cement accelerators or retarders to meet job specific thickening time requirements.

HT GEOLITE A 13.5 lb/gal geothermal slurry that is the base blend for a lead slurry over a higher range of bottom hole temperatures. Designed for zero free water and can be adjusted for higher fluid loss control and thermal stability. Thickening time can be adjusted retarders to meet bottom hole conditions.

HT GEOTAIL A premium geothermal cement blend that poses rapid strength development and great fluid loss control. This slurry is typically used as the tail slurry and it is suitable for wells with bottom hole circulating temperatures above 160°F. This slurry can be adjusted by adding loss circulation material and/or cement retarders to meet job specific thickening time requirements.

TC DURACEM A family of premium geothermal cement blends suitable for harsh or corrosive environments. These blends exhibit exceptional fluid loss control and very low permeability once set. Cement slurries are typically engineered for the specific conditions of the well. TC DURACEM can be used in wells with higher concentration of Carbon Dioxides and/or Sulfur Dioxide. It can also be used to combat minor gas migration potentials in wells. ThermaSource Cementing mixing process is performed by an efficient method to reduce waste on job site.

TCI FOAMED CEMENT An automated engineered process in which nitrogen gas is injected into a base cement slurry to create a low density cement. The expansive nature of foamed cement is ideal for large voids or fractures in wells and wells with severe gas migration potential. Foamed cement jobs are engineered for the specific well conditions.